Write a Review

Chamois Butt'r starter pack Variety pack: - 2x Coconut: Non-greasy skin lubricant made with Organic Coconut Oil and Shea Butter - 6x Original: Non-greasy skin lubricant that easily washes off skin and clothing with soap and water - 2x Her: Made with aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil - 2x Eurostyle: Non-greasy skin lubricant with a traditional European cooling formula

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.7mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 129g

Based on the popular ST Core Prime shape comes the all-new ST Gel. The ST Gel is designed for a more cost-conscious rider. The orthopedic comfort foam provides a high level of support and comfort over long distances. The gel pads guarantee additional comfort around the sit bones. The relief surfaces are gender specific.

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate

- 3mm thick protective layer - The archetypal high quality touring tire - E-Bike Ready. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50).

Day in, Day out. A bike for any day and anywhere. Fun and light to rip around the neighborhood for meet-ups, running errands, or Sunday fun days. Highlights - Light, durable aluminum frame and fork - Integrated connectivity with the Cannondale App - Wide-range 9-speed gearing with hydraulic disc brakes Where it thrives - In town, leisurely rides, on crowded streets What it's built for - Agility, comfort, durability

The Continental Mountain King is your hero on the mountain and the perfect trail companion. Its middle lugs are angled for acceleration and speed, while the deep-seated outer lugs take care of stability. - Sure-footed in hilly terrain and a great "do-it-all" option for year-round riding - Completely re-engineered casing that seats and inflates the first time with all tubeless systems - Newly positioned lugs promise lower weight and better handling, even on softer ground

Our Body Geometry Dual-Gel gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising grip. - Combination of breathable mesh at the upper and soft Lycra make for a durable and comfortable top of hand. - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves. - Reflective elements increase your visibility to motorists in low-light conditions. - Soft and absorbent Microwipe thumb brushes away sweat with ease. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort.

Origin-8's Pro Pulsion 2-Stage Gauge Pump features a large, telescoping barrel that inflates tires quickly, and a reversible Presta/Schrader valve head. Dial in your pressures with the precision in-line gauge. And, you'll love the great, ergonomic T-handle and convenient mounting bracket.

- 12mm flexible braided steel cable provides increased cut resistance - Includes hook-n-loop strap for extra stability during transportation - Lock head rotates 360 degrees for easier handling during lock-up and removal - 2 easy-to-use reversible keys - 12mm thick cable - 65cm in length - Key Safe Program

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

Schwalbe's Marathon Plus is legendary for durability and protection. Their nearly impenetrable 5mm-thick SmartGuard layer almost eliminates flats over the course of the tire's excellent, long life. Whether you're setting out on a cross-country bike tour, cruising on a tandem, or just want peace of mind during your daily commute, the Marathon Supreme is in it for the long haul.

- CNC machined 6061-T6 aluminum chain tensioners - Compatible with 3/8 inch and 10mm axles - Single bolt operation makes tensioning a simple task - Material: 6061AL

Our new Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Compatible with conductive touchscreens. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Fabric Content: Back of hand: 82% Nylon, 18% PU; Palm: 80% Polyester, 20% Spandex - Lightweight and highly breathable back-of-hand fabric keeps things cool. - Perforated palm is micro-vented for sublime breathability. - Power knit mesh between your fingers allows for maximum air flow.

You earn your ride through the climb, but you're really in it for the downhill. Our Smith Session helmet is made for the all-mountain rider that wants speed and style in one protective package. The ultralight feel and innovative protection of Koroyd in strategic, zonal impact areas let you bomb and blaze with confidence. Generous air ports on the top work with internal air channels to provide ventilation that keeps you cool on the uphill and helps maintain your focus in descent mode. Plus, it accommodates easy goggle or eyewear storage so you can sit back and enjoy the view from the top without accidentally smashing your gear. PROTECTION: Complete Koroyd coverage for lightweight, energy-absorbing and ventilated impact protection, MIPS Brain Protection System reduces rotational forces caused by angled impacts to the head FIT / INTEGRATION: VaporFit dial adjustment system offers 270-degree fit adjustment with the turn of a dial, Designed for ultimate integration with Smith performance eyewear and goggles for maximum comfort, venting and storage convenience, AirEvac ventilation system integrates with Smith goggles and eyewear for fog-free lenses FEATURES: 15 fixed vents for consistent airflow, Three-position adjustable visor, Ionic+ antimicrobial lining offers sweat-activated odor control, Lightweight, low-bulk single layer webbing WEIGHT: (Size M, MIPS) 13oz / 370g CERTIFICATION: CPSC, CE EN 1078

Perfect for toddlers on the move, the Mio helmet features bold graphics, a revolutionary magnetic buckle that prevents pinching, and the Headset SC fit system for an easy, secure fit. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 1 and Older (Extended Head Coverage). - MIPS-equipped. - Headset SC fit system with toddler-oriented sizing that's designed for an easy and accurate fit. - In-molded shell improves strength and reduces weight. - Magnetic buckle improves comfort and allows parents easy and secure strap attachment that helps to prevent pinching. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Integrated visor/sun brim provides shelter from sunlight. - Front mesh-covered vents to keep out bugs. - Shape designed to accommodate child trailer use. - Toddler size, approximately up to age three.

Big berms, rock gardens, or flowy rollers. No matter the trail, get after it with confidence in the Smith Engage mountain bike helmet. Zonal Koroyd™ complements MIPS® for energy-absorbing impact protection in the event of a crash. A dial-adjustable fit and extended back coverage provide a locked-in feel. On hot days or exposed climbs, 20 fixed vents and our AirEvac™ ventilation system keep you cool and comfortable. Channels on the front make it easy to stow eyewear and a two-position visor rotates up for on-the-go goggle storage. Product Details: Protection: - Lightweight in-mold construction, Zonal KOROYD® coverage for lightweight, energy-absorbing, and ventilated impact protection - Mips® Brain Protection System reduces rotational forces caused by angled impacts to the head - CPSC and CE EN 1078 certified Fit / Integration: - Adjustable dial fit system for a customized fit - Designed for ultimate integration with Smith performance eyewear for maximum comfort, venting, and storage convenience - AirEvac ventilation system integrates with Smith eyewear for fog-free lenses Features: - 21 fixed vents for consistent airflow - Performance comfort lining - Lightweight, low-bulk single-layer webbing - Two-position adjustable visor Weight (Size M, Mips®): 12 oz / 350 g

The all new Bluegrass Vapor Lite is a pure performance glove. Made for the hottest day on the saddle, it’s the lightest and most breathable MTB glove in our range. Its simplicity hides the advanced technical textiles that characterize it. - Four-way-stretch, perforated, featherweight breathable mesh on the upper construction - Minimalist cuff ensures comfort and an ergonomic shape - Breathable perforated palm to improve ventilation and comfort - Silicone wrist gripper keeps gloves securely on - Moisture-wicking mesh finger gussets enhance ventilation and sweat evaporation - Soft-touch covered thumbs to clean dirt and sweat from face and eye-wear - Fade-resistant sublimated graphics for a modern look - Hollow overlay thumbs maximize durability and prevent blisters

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

Our new Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Compatible with conductive touchscreens. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Fabric Content: Back of hand: 82% Nylon, 18% PU; Palm: 80% Polyester, 20% Spandex - Lightweight and highly breathable back of hand fabric keeps things cool. - Perforated palm is micro-vented for sublime breathability. - Power knit mesh between your fingers allows for maximum air flow.

Dirty drive train? We have you covered. Bike and wheels covered in mud? No problem! This is the perfect basic kit to clean and lube your bike. - 1 Liter Bike Wash - Bio-Degreaser, 500ml - 50ml Bio Dry Lube - Claw Brush

Our Gravity Shorts are the perfect blend of durability, ventilation, and fit. Constructed from the robust Nylon Cordura fabric, these shorts redefine resilience, providing both protection and agility. Lightweight, stretchy, and abrasion-resistant, they seamlessly adapt to your every move, all while being cut to pedal efficiently with knee pads. A water-resistant treatment adds an extra layer of defense against light precipitation and trail spray, ensuring you stay dry and focused. Laser-perforated venting strategically placed at the lower back and inner thigh keeps you cool, allowing you to push your limits and extend your ride. The elasticated waistband, featuring an interior silicone gripper, guarantees a secure hold without compromising comfort. Bonded seams contribute to a streamlined profile, reducing bulk and weight. Explore the trails with ease, knowing that two side zipper pockets provide convenient access to your essentials, and the locking snap closure adds a touch of strength and security to your ride. - Nylon Cordura fabric is durable and abrasion resistant, yet lightweight and stretchy. - Water resistant treatment protects you from light precipitation and trail spray. - Laser perforated venting at the lower back and inner thigh keep you cool and riding longer. - Elasticated waistband with interior silicone gripper provides a secure hold around your waist. - Bonded seams reduce bulk and weight. - Two side zipper pockets for easy access to essentials. - Locking snap closure is strong and secure. - Fabric Content: 84% Nylon Cordura, 16% Spandex.

The Dice Duo is the smallest USB rechargeable light capable of changing from a white headlight to a red tail light at the press of a button. Designed for the road, this cubic inch light can turn from an impressive 110 lumen headlight to see, to an attention-grabbing 30 lumen tail light to be seen. Its adaptable flex mount can easily strap to handlebars or seat posts in a snap, even aero styles. For premium safety, its Adaptive Flash technology senses day or night, automatically switching to the optimal flash mode to maximize your visibility. Made for road cyclists and commuters, the Dice Duo is a powerful headlight and a tail light rolled into one. Performance - Functions as 110 lumen bicycle headlight or 30 lumen tail light Technology & Safety - 2 in 1 technology allows you to switch from headlight to tail light just by holding the power button for 3 seconds. - 8 headlight and 8 tail light lighting modes engineered for use on roads and commuting - Headlight mode: Boost, High, Medium, Low, SteadyPulse® Low, SteadyPulse® High, DayLightning® Triple Flash, DayLightning® Single Flash - Taillight mode: High, Group, Single Flash-Day, Triple Flash-Day, SteadyPulse® -Day, Single Flash-Night, Triple Flash-Night, SteadyPulse® -Night - SteadyPulse® mode alerts motorists with attention-grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Cycling Tuned Optics expands your field of vision with an extra-wide and long-range beam compared to typical lighting optics - IP64 water-resistant design for use in all weather conditions - USB rechargeable internal battery lasts up to 90 hours - Light mode memory saves the mode you're in before the light is turned off - Low battery indicator alerts you when a charge is needed RUN TIMES: Headlight mode: 1 hrs to 40 hours Taillight mode: 1:45 hrs to 90 hours CHARGE TIME: - 2 hrs MOUNTING: - Flexible mount easily adjusts to fit on handlebars and seat posts including aero styles BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 30g *Features and specs are subject to change without notice.

- Built for everyday use and features a stainless steel top plate and a hollow, steel axle. - A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. - The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Como is a laid-back, comfortable e-Bike with the power of a confident ride. Como lets you go with the flow by giving you a full-power, confidence-inspiring, utterly delightful experience on a bike that feels effortless to ride. - Turbo Full Power 2.2 motor and 710Wh battery offer an unparalleled riding experience, providing a smooth, seamless, and shockingly quiet amplification of your efforts, up to 28 mph. The integrated controller responds to your pedal inputs resulting in intuitive amplification of your efforts with an incredibly natural feel. - MasterMind and Mission Control - The MasterMind display reveals all relevant info about your ride, allows real-time tuning of support levels, and enables over-the-air updates so that your bike gets better over time. MasterMind seamlessly integrates with the Mission Control app for range optimization tools, advanced tuning, on-ride diagnostics, and more. - The enviolo AUTOMATiQ Internal Gear Hub (IGH) stepless shifting technology automatically shifts gears based on a rider’s pedal pace, taking changes in the surroundings into account. By selecting a preferred cadence or pedal pace, it allows riders to “set it and forget it”, adding an extra layer of safety and comfort for riders. - Proven Smooth Efficiency - We designed a custom testing mechanism to analyze bumps at even the smallest frequency to increase comfort and vision. That precision, paired with a suspended seatpost, higher volume tires, and an 80 mm suspension fork, will flatten roads before your eyes. - Turbo System Lock - Use the Mission Control app to disable your bike’s motor and activate the motion sensor alarm. Once locked, the motor cannot be enabled again except by the owner. - Garmin Radar - An integrated Garmin Radar sensor lets you know when traffic is coming up behind you. Garmin’s Radar technology can detect cars up to 140 meters away. MasterMind will give riders a visual, audible, and haptic alert of an approaching vehicle’s relative distance and rate of speed. - Fully Integrated Removable and Lockable Downtube Battery - Easy to charge, easy to secure. - Equipped with DRYTECH Fenders, LED front and rear lights, and 27kg capacity rear HD Rack. The rear rack is compatible with child bike seats, and the bike is also rated to pull a thru-axle trailer

Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - Hollow Exogram carbon arms - BB/Spider/Chainrings not included

With seven wins at Paris-Roubaix, our Roubaix has proven that Smoother is Faster. Until this moment, however, smooth has admittedly come with some compromises. But not anymore. The all-new Roubaix now delivers compliance without compromise by introducing a radical new Future Shock 1.5 that gives you more control on rough roads, a new Pave seatpost that creates our most balanced Roubaix to date, aerodynamics that equal the Tarmac, and a Rider-First Engineered frame that's shed some serious weight. Is it still comfortable? Sure, but don't call it a comfort bike, because performance was behind every engineering decision we made. This is the new Roubaix. This Roubaix provides a tremendous value, but like the frame itself, this value doesn't come with any compromises. We spec'd it with Shimano's Tiagra 10-speed group for its crisp shifts and powerful hydraulic disc brakes, as well as reliable Axis Elite Disc wheels, a Praxis Alba crankset, the all-new S-Works Pave seatpost, 32mm RoadSport tires, and our fan-favorite Power Sport saddle. - The new frame delivers compliance without compromise via the perfect balance of aerodynamics, light overall weight via a FACT 10r carbon construction, compliance, and Rider-First Engineering. With tube shapes that were born in our FreeFoil Shape Library and validated in the Win Tunnel, the new Roubaix is more aero than the Tarmac SL6. Meanwhile, to ensure the weight and ride quality, we turned to a Rider-First Engineered design to deliver optimal stiffness and compliance across all sizes, from 44 to 64cm. Of course, the frame has shed some serious weight in the process. And to prep you for your own Hell of the North, we've made room for 33mm tires. - To go along with the new frame, we've also developed a totally-new S-Works Pave seatpost. Not only is it the first compliant seatpost that's also aerodynamic, it does so without any additional weight or finicky contraptions. Starting with the same D-shape design found on the Tarmac, we took its compliance a step further by building additional flex into the upper and developing a new drop-clamp design in the frame. This provides plenty of compliance, while staying perfectly balanced with the front-end, so you get a smooth, balanced ride no matter how rough the road. - With 20mm of rough-road-taming travel, the Future Shock 1.5 not only delivers a smoother, more comfortable ride, but it also reduces fatigue and increases speed over harsh terrain. The new Smooth Boot, meanwhile, enhances the aesthetics to bring a clean transition from the head tube to the stem

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

The Haro Shredder represents step-1 on the BMX journey - a capable neighborhood bike with deep roots in the Haro Freestyle back catalog. Reborn from its hey-day 30-years ago, the Shredder is light and versatile - thanks to its 6061 aluminum frame - and available in a variety of frame sizes ranging from 12” to 24”. A carefully selected group of Haro branded components complement a quality package and position the Shredder as a great value vehicle for freedom and fun. For those who want to take their riding to the next level, check out the Haro Destinations range and a series of bikes designed and suited to jumping, skate park riding, and going big in the street.