Tires/Tubes

- Shim adds support to Presta stem used in a Schrader rim

Resolute 42 is the ultimate all-weather gravel tire for those who believe there is one perfect tread pattern for all your rides. Truly all-season in nature, we call this our set-it-and-forget-it tire that keeps on keepin' on. SG2 PUNCTURE PROTECTION: These tires are available with our all-new SG2 Puncture Protection, which is a lightweight nylon insert that provides bead-to-bead coverage and ensures every area of the tire is defended against slashes and punctures. As events become progressively rougher and cyclists pedal farther, gravel gets tougher. It only makes sense for gravel tires to become tougher as well. - Nylon fibers have a flat profile, which reduces the amount of rubber needed to fill the gaps between fibers and minimizes weight. - Protected SG2 gravel tires feature a 120tpi casing, which improves suppleness compared to a traditional 60tpi tire. - SG2 was specifically designed to be a puncture protection layer, but it also improves air retention and eliminates seeping at the sidewall. FEATURES: - Widely spaced square knobs deliver consistent traction while shedding muck with ease. - Performs well in all conditions, no need to swap tires based on the weather.

- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Valve: Presta Short 32-40mm - Valve Core: Removable - Wall Thickness: 1mm - Weight: 500g

GRAVEL Designed with the unknown in mind, the Rutland takes the guess work out of selecting the right tire for the ride. Ramped, tightly spaced center lugs reduce rolling resistance while larger, more spaced-out shoulder and transition lugs provide grip in loose conditions. HOW IT WORKS - Center lugs are large and widely spaced for braking and acceleration grip, and ramped to lower rolling resistance. - Transition lugs are spaced out to shed mud; siping conforms to the road surface for increased traction in corners. - Side lugs are staggered to provide traction in more aggressive turns and on loose surfaces.

GRAVEL Sometimes the greatest journeys are full of memorable experiences: churning over towering mountain passes, trying to make it to the next town before the café closes, pedaling from sunrise to sunset, or sleeping in when you’re gifted with perfect weather and an incredible view from your tent. We designed the Sparwood around long-distance mixed-terrain routes, for riders seeking to experience the land, not just ride on it. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Diamond- and chevron-shaped transition lugs feature staggered spacing and height to improve shedding and traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Size: 700c x 35 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 122g (32mm), 124g (48mm), 126g (60mm)

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 450g (1.5 – 1.75), 475g (1.75 – 2.125)

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 468g (1.5-1.75), 536g (1.9-2.125)

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 452g (1.5-1.75), 642g (1.9-2.125)

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 1-3/8 - ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width: 37mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- Size: 26 x 2.4 – 2.75 - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm, 69mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 283g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable