Parts

Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Hollow pins for reduced weight - NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life - Links (links): 114 - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 255 grams

The 40's GRIP2 damper delivers ultimate performance and control when the going gets rough. Equipped with the Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping and less friction overall, the 40 is just as comfortable in the bike park as it is racing the World Cup circuit. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products are World Cup proven. Buttery smooth Kashima's distinctive gold color is backed by its high performance attributes—properties that provide an exceptionally smooth feel and extreme durability. GRIP2 — Next-Generation Sealed Cartridge FIT Damper GRIP2 is our next-evolution sealed cartridge FIT system, our highest performing gravity-focused damper. The new damper shares its roots with the original GRIP architecture but has been seriously enhanced with all-new technology: 4-way adjustability, VVC high-speed rebound circuit, high-performance mid-valve, and overall friction-reducing treatments. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity. - FIT GRIP2 damper with 4-way high- and low-speed compression and rebound damping - 29" wheel with 20mm Boost thru axle - FLOAT EVOL air spring - Air bleed system ensures consistent fork performance at any altitude - Factory Series models feature Genuine Kashima Coat

Flat Mount Disc Caliper Bracket Bolts

- Aheadset preload adjusting bolt

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Stainless steel pedal washers - Sold in pairs

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Crank dust cap - Works with most three-piece crank models

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Bolt

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Rubber - Color: Black

- Hoods with (FD) are Flight-Deck compatible