Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
DeFeet's Slipstream Shoe Covers fit snugly over your shoes to shield you from the cold and provide an aerodynamic advantage too. They also protect your shoes from weather and debris.
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
- Wind-resistant fabric - Microfleece lining - Reflective logo
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding. - 110cm: Shoe Size 36-41 - 120cm: Shoe Size 41.5-43 - 130cm: Shoe Size 43.5-45 - 140cm: Shoe Size 45.5-49
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements
When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
Ideal for the cold season: Extremely lightweight GORE WINDSTOPPER overshoes keep your feet wonderfully warm. They fit snugly on shoes for a close fit. A zipper on the back makes for easy off and on. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Reflective logo and piping - Zipper closure
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
The utilization of GORE WINDSTOPPER material on these overshoes provides a low bulk solution to keep your feet warm. The flexible and breathable WINDSTOPPER material will fit snuggly to your shoes to prevent flapping and maximize moisture management. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Thermo lining: Increases warmth; brushed and soft back for next-to-skin comfort - Reflective logo and piping - Fully taped seams for increased protection - Zipper closure
Page 1 of 5 Next page