Other

Flat Mount Disc Caliper Bracket Bolts

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Stainless steel pedal washers - Sold in pairs

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Bolt

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Rubber - Color: Black

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms