Filter By:
- Parts & Accessories (23)
- Pedals (19)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pedals
$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$19.99
- One-piece ABS resin body
- Non-slip rubber surface
- Boron spindle
- 388g pair
$14.99 - $24.99
$19.99 - $24.99
Up to 25% Off
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material.
- Micro knurling with 24 pins for traction
- Recessed end to prevent damage to bearing cover
- Chromoly spindle with 6mm broach and 15mm wrench flats
- Weight: 391g
- Pedal Body Material: Composite/Plastic
$19.99 - $28.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$13.99 - $28.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated.
- High-strength plastic composite
$19.99
Dimension City Pedals.
- Built-in reflectors, will not accept toe clips
- Molded nylon; 1-piece, caged-type pedal
- Slip-resistant surface
$13.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
$19.99
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g
$11.00 - $14.99
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips
$11.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$18.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks.
- Injection-molded nylon-composite body
- Heat-treated 4140 chromoly broached spindle
- 105mm length x 100mm wide
- 3.5mm pin height
- 12 pins per side
- Thickness: 18mm and 24mm at bearing cover
- 9/16"
$16.79
- One-piece resin body
- Barefoot friendly rubber surface
- Includes reflectors
$18.89
- Nylon co-molded body with rubber tread surface
- Reflectors included
- 9/16"
$14.69
- One-piece resin body
- Juvenile size platform
- Boron spindle
- 390g pair
$12.59
- One-piece resin body
- Chromoly spindle
- Toe clip compatible
- 366g pair
$10.49
- City/road half clips
- With reflectors
- No straps needed
- Resin
$16.79
- One-piece resin body with rubber surface for grip
- Boron spindle
- 400g pair
$14.69
- One-piece nylon body
- Chromoly spindle
- Toe clip compatible
- 407g pair
$17.29
- Fits most platform pedals
- Two wooden riser blocks w/durable rubber band
- Adds 3/4" to each side (1-1/2" total)
$10.49
- Heavy-duty nylon toe straps with classic style steel buckles
- Narrow design fits most cage style pedals
- 460mm length
$10.00
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
- Package includes two cleat stackers.
$12.99
Replacement pin set for Race Face Atlas and Aeffect pedals.
$19.99 - $21.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing
Page 1 of 2
Next page